- Morgan's Packs
- Mangrove Jack's Packs
- FWK Packs
- Kegerator & Kegs
- e-Gift Cards
iSpindler electronic hydrometer
Control your density and temperature in real time?
No problem with the iSpindler.
The iSpindler is a hydrometer (density meter) and wireless electronic thermometer to follow the evolution of density and temperature during your fermentations of beer, wine, or any other fermentable nectar.
Avoids the waste of your precious beverage following multiple density intakes to know the progress of fermentation.
Thus avoids at the same time the risk of infection by the fermenter tap following the repeated opening/closing of it, which are no longer essential with the iSpindler.
It is necessary to have a wifi network (type internet box) near the iSpindler so that it can connect to it in order to transmit the data. Because the iSpindler needs to be connected to a Wifi network, otherwise the data will not be able to be transmitted to your terminal.
The data can be consulted at any time even without being at home or near the iSpindler. You can consult them from your place of work, your holiday place, being on the other side of the world, or from any other place, as long as the internet connection to which the iSpindler is connected is active, as well as the one on the terminal from which you want to consult the data.
The data can be used through applications such as:
- Brewfather (recommended): https://brewfather.app/
- Little Bock* (recommended): https://www.littlebock.fr/
- Brew Spy
The iSpindler can be used in a plastic-type bucket or in a stainless steel tank.
Be careful, however, to add the constraints that can affect the strength of the signal.
Example: stainless steel fermenter + refrigerator + blackberries + distance from your wifi network. In this case you may need to provide a wifi repeater in your configuration so that you can receive the data transmitted by the iSpindler.
The autonomy of the iSpindler can be understood beyond 3 months (depending on the frequency of the data synchronization, indeed it is configurable).
- be careful not to modify or delete the line of code (formula) located in the "polynominal" part at the bottom of the iSpindler configuration page
- nor to make a calibration via the "maintenance" part, it has already been carried out
otherwise Ma Petite Brasserie could not be held responsible for the malfunction or non-functioning of the device.
The iSpindler is not intended to replace density measurements with a density meter plunging at the beginning and end of fermentation. It is possible that a difference of a few points of density is observed between the reading of the density indicated by the iSpindler and a measurement made with a plunging density meter. This is quite normal and in no way demonstrates a malfunction of the device. The density displayed by the iSpindler is purely indicative and not contractual.
* in the settings of the Little Bock site please indicate the Plato unit to have the display in SG (1.xxx) (subject to modification by the Little Bock site)
1 x iSpindler Electronic Hydrometer
1 x Battery
1 x Setup manual in French
NOTE: The iSpindler has a USB-C port for charging the battery. Cable is not provided.
Be the first to ask a question about this product!